烫平机系列
 
YPAIII-2500~3000三滚烫平机(平烫机)
YPAIII-2500~3000 Three Rollers lroning Machine
 
YPAII-1800~3000双滚烫平机
YPAII-1800~3000 Double Roller lroning Machine
 
YPAI-1800~3000单滚烫平机
YPAI-1800~3000 Single Roller lroning Machine

工业烫平机的结构简介
1 烫平机机系卧式两端箱体型结构,滚筒为优质不锈钢板精制而成,传热快,熨烫平整光滑,不污染、损伤布草。
2 烫平机传动、进汽和疏水系统分别置于两边箱体内,外型美观新颖,结构紧凑,体积小。
3 烫平机安全可靠,进料部分装有限位机构,输送时人手触接护指板立即停车,保障操作人员的安全。
4 烫平机在输送系统各层次间设置了对应的速差,使织物更易张紧压平。
5 烫平机传动系统由电机经减速机,再经链条传动带动滚筒,超负荷能力强,有一定的缓冲和减振性能,各链条均有张紧装置,方便调节松紧。
6 烫平机采用宽绽带传送,并用隔圈相隔开,避免了绽带在传送中难以解决的游动现象,同时采用微型搭扣联结,装拆、更换方便。
7 烫平机蒸汽进口装有安全阀,出厂前已调校好,正常工作时,一般不需调整,用户每年必须送劳动部门校验一次。
8 烫平机各输送层次间用耐温微薄导向带隔离,保证织物不产生粘结现象,故上浆织物也能达到满意的熨烫效果。

Main Features:
The machine adopts speed-adjusted ,users can choose ironing speed according Io different fabrics and pressed conditions.
Using pressure steam cylinder or infrared quartz tube .to heat drum surface .high heating eddiciency.
The machine adopts stroter to make the gear running down .with high speed rate , high efficirncy over-loading ability and low loise.
Driving by chiains ,that can bear a very heavy loading.
Using wide conveyer belt for the cylinder ,adopts rotary connections for sealing to avoid the flowing phenomenon during the period transmission.
Each cylinder posses different speeds , which makes the efficiency better.
The steam input of the cylinder adopts rotary connections for sealing to avoid steam leaking , with longer life.
We have succssfully developed four , five and six cylinders ironing machine , customers could updrating the ironing machine according to your requirements.
Steam heated or electric ones are available.

 
型号
Type
外形尺寸
Overall dimensions
(mm)
滚筒尺寸及数量
Roller dimension
(mm)and quantity
电机功率
Moto power
(kw)
电加热功率
Electric heating power(kw)
熨烫速度
Rotate speed(m/min)
蒸气压力
Steam pressure
(MPa)
备注
Note
YPAI-1800 2800×1400×1500 Φ800×1800/1 0.75 18 0-7 0.4-0.6 电加热型和蒸汽型号
Electric & steam type
YPAI-2500 3500×1400×1500 Φ800×2500/1 0.75 24 0-7 0.4-0.6
YPAI-2800 3800×1400×1500 Φ800×2800/1 0.75 30 0-7 0.4-0.6
YPAI-3000D 3960×1400×1500 Φ800×2800/1 0.75 36 0-7 -
YPAII-2800D 3760×2400×1500 Φ800×2800/2 1.5 72 0-20 -
YPAII-3000 4000×2400×1500 Φ800×3000/2 1.5 - 0-20 0.4-0.6
YPAIII-3000 4100×3400×1500 Φ800×3000/3 2.2 - 0-20 0.4-0.6
YPAI-2800M 3760×2000×1700 Φ1166×2800/1 1.1 - 0-7 - 烧木材型,外加引风机与燃烧炉
Wood-buring type with blower
YPAI-3000M 3970×2000×1700 Φ1166×3000/1 1.5 - 0-15 -

滚筒长度规格较多,用户可根据情况任意选择。
Dimension of ironing roller can be customized.